|
2600 Series |
|
|
|
2600
Series Hand Strap
Handstraps come
standard with all 2600 Cases.
Choose this option for a replacement hand strap. This provides an
elastic neoprene strap with Velcro closure. The strap keeps the
unit firmly in your hand in adverse conditions.
|
|
NZ$21.95 incl. GST
|
|
1900 Series |
|
|
|
1900
Series Belt Clip
The Belt Clip for the
1900 provides a robust belt mounting system for on the go all day
use. This holster style system securely holds the case and
utilizes the removable, heavy duty Otterbox belt clip. The 1900
belt clip is an excellent solution for full time users who want
quick, easy access to their PDA.
|
|
NZ$49.95 incl. GST
|
|
1900
Series Vehicle Mount Kit
The vehicle mount
adapter allows you to mount your 1900 PDA case onto any vehicle
using a Ram 101 style mount (available separately from
www.ram-mounts.com or
included with our other mounting kits). The mount holds your 1900
PDA case securely while still allowing the case to be easily and
completely removed from the mount. Includes mount and all
necessary hardware. Can also be used for your own custom mounting
solutions.
|
|
NZ$49.95 incl. GST
|
|
1900
Series Neck Lanyard Kit
The Neck Lanyard Kit
provides a comfortable solution for all day use. The kit consists
of a high quality neoprene neck strap which easily attaches to the
back of the case.
|
|
NZ$79.95 incl. GST
|
|
1900
GPS POD Kit (Large)
The Large POD allows
for the use of larger GPS devices and other sizable CF and SD
accessories while providing full environmental and impact
protection. The Large POD installs in place of the standard 1900
POD lid and provides additional room inside the case to allow for
GPS devices to be installed directly into the PDA while still
being enclosed in the case. The Large POD allows for users to
operate GPS devices in the harshest of environments without
worrying about damaging expensive equipment.
The standard pod lid (included with the 1900) will fit a CF device
with maximum dimensions of Length 2.17in[55mm], Width 3.0in[76mm],
and Height .88in[22mm]. The large pod lid will fit a CF device
with maximum dimensions of Length 4.0in[102mm], Width
3.15in[80mm], and Height .88in[22mm]. This length includes the
entire CF device including the card section.
|
|
NZ$89.95 incl. GST
|
|
1900
Series Permanent Mount Kit
The permanent
mounting kit allows you to mount your 1900 PDA case onto any flat
surface (requires drilling 3 holes). The kit includes a heavy
duty, shock-absorbing, adjustable mount which allows you to
position your PDA in the best location and protect it from
vibration. The PDA case is held securely while being easily and
completely removable from the mount. Includes mount and all
necessary hardware.
|
|
NZ$99.95 incl. GST
|
|
1900
Series Handle Bar Kit
The handlebar
mounting kit allows you to mount your 1900 PDA case onto
motorcycles, bicycles, ATVs, or any vehicle with up to a 1.0
handlebar. The kit includes a heavy duty, shock-absorbing,
adjustable mount which allows you to position your PDA in the best
location and protect it from vibration. The PDA case is held
securely while being easily and completely removable from the
mount. Includes mount and all necessary hardware.
|
|
NZ$109.95 incl. GST
|
|
1900
Medium POD without window
The Medium POD allows
for the use of mid-size GPS devices and other CF and SD
accessories while providing full environmental and impact
protection. The Medium POD installs in place of the standard 1900
POD lid and provides additional room inside the case to allow for
GPS devices to be installed directly into the PDA while still
being enclosed in the case. The Medium POD allows for users to
operate GPS devices in the harshest of environments without
worrying about damaging expensive equipment.
The standard pod lid (included with the 1900) will fit a CF device
with maximum dimensions of Length 2.17in[55mm], Width 3.0in[76mm],
and Height .88in[22mm]. The medium pod lid will fit a CF device
with maximum dimensions of Length 3.0in[77mm], Width 3.15in[80mm],
and Height .88in[22mm]. This length includes the entire CF device
including the card section.
|
|
NZ$119.95 incl. GST
|
|
1900
Serial POD Kit
The Serial POD adds
an external serial connection and charging point to the case. The
serial POD only works with newer model HP iPAQs which have the
standard 22-pin connector on the bottom. The POD easily installs
in place of the rubber plug on the bottom of the 1900. Null modem
style serial devices (GPS, survey equipment, etc.) can be
connected to the PDA through the DB9 serial connection on the POD.
The POD can also be used to sync the PDA when used with a null
modem adapter. A 4mm power jack is incorporated into the POD so
that the PDA may be charged using the standard HP iPAQ AC adapter
without removing it from the case.
Note: The serial connection is rated as water-resistant, not water
proof. The case is not submersible with the serial pod attached.
The integrated cap can be used to cover the connections when they
are not in use.
|
|
NZ$129.95 incl. GST
|
|
1900
Suction Mount Kit
The suction mounting
kit allows you to mount your 1900 PDA case onto windshields,
boats, or any smooth surface. The kit includes a heavy duty,
shock-absorbing, adjustable mount and a 3.25(82mm) suction cup
with release lever. The PDA case is held securely while being
easily and completely removable from the mount. Includes mount and
all necessary hardware.
|
|
NZ$129.95 incl. GST
|
|
1900
Scanner POD Kit (Medium)
The Scanner POD
allows for the use of CF and SD scanner devices while providing
full environmental and impact protection. The POD has a hardened,
scratch-resistant lens for the scanner to operate through which
allows for 99% transmission of the laser light. The Scanner POD
allows for users to operate barcode reader devices in the harshest
of environments without worrying about damaging expensive
equipment.
|
|
NZ$139.95 incl. GST
|
|
1900
Yoke Mount Kit
The rail mounting kit
allows you to mount your 1900 PDA case onto boats or any round or
flat rail up to a 2.0(51mm) wide. The kit includes a heavy duty,
shock-absorbing, adjustable mount which allows you to position
your PDA in the best location and protect it from vibration. The
PDA case is held securely while being easily and completely
removable from the mount. Includes mount and all necessary
hardware.
|
|
NZ$159.95 incl. GST
|
|
3600 Series |
|
|
|
Bridge Mount Kit
For adding mounting accessories
Compatible with Cateye (www.cateye.com)
H32 handlebar mount
Compatible with RAM B-size mounts. Requires RAM B-238 mount to
adapt (www.ram-mount.com)
Includes 4mm threaded insert for custom applications
|
|
NZ$27.95 incl. GST
|
|
3600
Series Belt Clip
Allows the 3600 to be
attached to any belt or strap. Belt Clip is indexable to avoid
unit from being accidentally pushed off when sitting.
|
|
NZ$49.95 incl. GST
|
|
3600
Medium Duty Handle Bar Mount
Everything you need to mount your Armor 3600 to a bicycle
handlebar
Fits 1.0" [25mm] diameter handlebars
Large plastic clamp to keep from damaging lightweight
handlebars
Great for mountain bikes, touring bikes, and road bikes
Uses Cateyeฎ brand quick release mount.
Case can be removed easily from mount for added security
Easy to install
Easy to use
|
|
NZ$49.95 incl. GST
|
|
3600
Basic RAM Mount
Permanently mount your Armor 3600 to any flat surface
Uses patented shock absorbing Ram Mount technology from NPI
Compatible with all B-size (1.0" ball) Ram Mount accessories
Case can be removed easily from mount for added security
Easy to install
Easy to use
|
|
NZ$49.95 incl. GST
|
|
3600
Series Neck Strap
Mounts to the back of
the case allowing the 3600 to comfortably hang around the user's
neck. High quality Neoprene padded Neck Strap.
|
|
NZ$79.95 incl. GST
|
|
3600
Heavy Duty Handle Bar Mount
Everything you need to mount your Armor 3600 to a handlebar,
round bar, or pipe
Fits up to 1.0" [25mm] diameter rails
For use with motorcycles, ATV's, snowmobiles, or anything else
you can think of
Uses patented shock absorbing Ram Mount technology from NPI.
Compatible with all B-size (1.0" ball) Ram Mount accessories
Case can be removed easily from mount for added security
Easy to install
Easy to use
|
|
NZ$79.95 incl. GST
|
|
3600
Series Suction Mount Kit
Everything you need to mount your Armor 3600 to a smooth
surface
Heavy-duty 3.25" [82mm] diameter suction cup with locking
lever
Uses patented shock absorbing Ram Mount technology from NPI
Compatible with all B-size (1.0" ball) Ram Mount accessories
Case can be removed easily from mount for added security
Easy to install
Easy to use
|
|
NZ$79.95 incl. GST
|
|
3600
Rubber Access Plug Kit
Sync and charge your PDA without removing it from the case
Replaces standard end plugs on Armor 3600 case with easy
access plugs
Plugs are easily opened from outside the case
Allows access to SD and CF slots on top of PDAs
Allows quick access to sync/charge connector on bottom of
PDAs
Made of durable elastomeric material for long life
Includes plugs for top and bottom of case
Easy to install and use
Note: Plugs are not watertight but are highly water resistant
|
|
NZ$79.95 incl. GST
|
|
3600
Series Thru the box POD Kit
Through the box POD
allows the end user to customize the connectivity to their PDA.
The end cap (gray area) can be modified to fit multiple
connections.
|
|
NZ$89.95 incl. GST
|
|
3600
Series Thru the box Connectivity Kit
The through the box
connectivity kit allow for multiple sizes of cables, power, sync,
GPS, printers, etc. to pass through the case and connect to your
PDA. The kit attaches easily to the case and works with all PDA
models.
Note: This kit is rated as water-resistant, not water proof. The
case is not submersible with this kit attached.
|
|
NZ$99.95 incl. GST
|
|
3600
Series IR Rubber Access Plug
Sync and charge your PDA without removing it from the case
Replaces standard end plugs on Armor 3600 case with easy
access plugs
Scratchproof IR window allows easy IR operation through the
case
Plugs are easily opened from outside the case
Allows access to SD and CF slots on top of PDAs
Allows quick access to sync/charge connector on bottom of
PDAs
Made of durable elastomeric material for long life
Includes plugs for top and bottom of case
Easy to install and use
Note: Plugs are not watertight but are highly water resistant
|
|
NZ$99.95 incl. GST
|
|
3600
Series Deep Box Kit
This kit allows the
case to be expanded for accessories such as dual expansion packs,
extra battery storage, and deep model GPS Units. Also has six
mounting bosses for custom applications such as circuit boards and
added battery mounting.
Deep Box Dimensions:
This kit adds .5 (12.7mm) to the depth of the 3600 series case.
This allows the case to be expanded for accessories such as dual
expansion packs, extra battery storage, and deep model GPS Units.
Also has six mounting bosses for custom applications such as
circuit boards and added battery mounting.
Internal: 171.5 x 91.5
x
42mm
External: 216 x 111min
x
76mm
|
|
NZ$129.95 incl. GST
|
|
3600
Series Yoke Mount
Everything you need to mount your Armor 3600 to a rail or
rounded surface
Fits up to 2.0" [51mm] wide rails
Uses patented shock absorbing Ram Mount technology from NPI
Compatible with all B-size (1.0" ball) Ram Mount accessories
Case can be removed easily from mount for added security
Easy to install
Easy to use
|
|
NZ$129.95 incl. GST
|
|
3600
Series CF Scanner POD Small
The Compact Flash
Scanner POD allows for the use of CF scanner devices while
providing full environmental and impact protection. The POD has a
hardened, ADC, scratch-resistant lens for the scanner to operate
through. A compact flash jumper cable is used to connect the POD
to the PDA within the case. Click on the compatibility chart below
to determine which POD fits your application needs.
Note: CF pod is compatible with Type 1
CF devices only. Type 2 CF devices cannot be used.
|
|
NZ$129.95 incl. GST
|
|
3600
Series CF POD Large
The Compact Flash POD
allows for the use of large CF devices that may not fit within the
Armor 3600 case. Your devices are fu |
